@356navid4 years agogoing to try this. thanks for the video.
@
@BatteryAddicted4 years agoAwesome video! I have the same EGPU and have been wanting to mount it under the desk. Will check out your other video! Thanks! 1
@
@timmay777774 years agoGreat video and thanks for the review on the desk frame! I was curious if you could share the height dimension of the middle crossbar that you slide into each side piece? I have a drawer that will need to clear this and I'm hoping is less than an inch! Also, what is the width of each side piece that connects into that middle crossbar? Again, thanks for your video and the help! ...
@
@DJSliick4 years agoSo This Frame Comes With Screws To Screw into The Table Top? I Wasn't Really Clear on How You Attach The Table Top To The Frame. Do You Have To Drill Holes Or Just Screw in The Screws? 2
@
@OliverRandorff4 years agoGreat video! How stable is the desk when in sitting/standing position? 1
@
@SamiyuruSenarathna4 years agoI got to know that Linmon top has a paper fill and there are pieces of particle boards where you fix legs etc. Does your Linmon top have a piece of particle board in the middle that could be used to mount a monitor arm? Are you using the 59x29 Linmon top? ...1
@
@MP1127914 years agoI definitely want to do the same exact thing, ikea counter top and all. I didn't see your instructional video in your uploads? 2
@
@ayushgoti7723last yearCan you install the ikea karlby counter top to this?
@
@pauljay73614 years agoHey man, nice video. Can I ask if securing the desktop to the frame was a problem as Linnmon desks are pretty much hollow in the middle. 3
@
@n00bma5ter694 years agoFollowing the exact same setup mate...hopefully arriving this week. Did you need a drill for the Linnmon or did a screwdriver do the trick? 1
@
@WarriorsPhoto4 years agoYo Ruslan. Why did you upload this video as an SD only video? And of course great video dude. I am looking for a standing desk myself. (: Who's the clean shaven dude in this video? 2
@
@apprenticedtopicbookcritic101i4 years agoIt is a beautiful table, and you installed it brilliantly, thank you for sharing. Do you have a tutorial about LINNMON Standing Desk-! It is a table like the modern engineering LINNMON Table chassis Canson drawing but the flat one for studying and business. I can't find a tutorial about the LINNMON on Youtube, not the ones published, I need this one am talking about specifically, my problem I don't know if there are holes for the nails to be screwed, I don't have a problem in conception or fitting pieces together, my problem is I can't create holes, am afraid it would be a mess, so if a tutorial exists, it will help me, so please if you have one Rasslan give debrief me about it. ...1
@
@ShoresOfHelll4 years agoSeems like u have the extended range vs the mid range. Can u pls confirm the lowest highest your desk is can go to? I am in the process of ordering mine. Thanks.
@
@josephracca443 years agoDid you have any issues with the screws going into the hollow material?
@
@sabergoli35184 years agoDoes the monitor shake while you are tyoing on it at all? 1
@
@VimalNkumar3 years agoHow much weight can ikea linnmon desk can withstand. I’m looking to buy frame for fully and desktop from ikea. I’m not sure if the desktop top can with stand 38’ monitor and 24’ monitor on monitor arms setup at the back edge of the desktop. Any thoughts ? ...
@
@JohnSmith-zl8rz4 years agohow do you get ONLY the base? they not sell just base, they sell the table too.
@
@AnjaliGola4 years agoWhat was the dimension of the frame and the table top? 1
@
@WalterVermeir4 years agoI am worried about put screws in that top because it is just carton inside. There is no mention about it so I suppose that is not a problem I suppose. Anyone who has experience how to drill screws inside them to attach stuff? ...2
@
@MorpheusLoopYMCMB4 years agoWhy did you get an IKEA table top? Fully also offer a black laminated top, just curious 1
@
@LCaaroe4 years agoI'm really interested in seeing a video demonstrating the stability - I know you've said it only shakes when you type hard, but people type differently, and Jarvis has promised that the new 2020 version (that you seem to have) should have increased stability over the old. The old one looks pretty bad when it comes to stability - looking at this test video: ...
@
@356navid4 years agogoing to try this. thanks for the video.
@
@DJSliick4 years agoSo This Frame Comes With Screws To Screw into The Table Top? I Wasn't Really Clear on How You Attach The Table Top To The Frame. Do You Have To Drill Holes Or Just Screw in The Screws? 2
@
@SamiyuruSenarathna4 years agoI got to know that Linmon top has a paper fill and there are pieces of particle boards where you fix legs etc. Does your Linmon top have a piece of particle board in the middle that could be used to mount a monitor arm? Are you using the 59x29 Linmon top? ...1
@
@BatteryAddicted4 years agoAwesome video! I have the same EGPU and have been wanting to mount it under the desk. Will check out your other video! Thanks! 1
@
@timmay777774 years agoGreat video and thanks for the review on the desk frame! I was curious if you could share the height dimension of the middle crossbar that you slide into each side piece? I have a drawer that will need to clear this and I'm hoping is less than an inch! Also, what is the width of each side piece that connects into that middle crossbar? Again, thanks for your video and the help! ...
@
@ayushgoti7723last yearCan you install the ikea karlby counter top to this?
@
@VimalNkumar3 years agoHow much weight can ikea linnmon desk can withstand. I’m looking to buy frame for fully and desktop from ikea. I’m not sure if the desktop top can with stand 38’ monitor and 24’ monitor on monitor arms setup at the back edge of the desktop. Any thoughts ? ...
@
@pauljay73614 years agoHey man, nice video. Can I ask if securing the desktop to the frame was a problem as Linnmon desks are pretty much hollow in the middle. 3
@
@ShoresOfHelll4 years agoSeems like u have the extended range vs the mid range. Can u pls confirm the lowest highest your desk is can go to? I am in the process of ordering mine. Thanks.
@
@MP1127914 years agoI definitely want to do the same exact thing, ikea counter top and all. I didn't see your instructional video in your uploads? 2
@
@JohnSmith-zl8rz4 years agohow do you get ONLY the base? they not sell just base, they sell the table too.
@
@sabergoli35184 years agoDoes the monitor shake while you are tyoing on it at all? 1
@
@josephracca443 years agoDid you have any issues with the screws going into the hollow material?
@
@n00bma5ter694 years agoFollowing the exact same setup mate...hopefully arriving this week. Did you need a drill for the Linnmon or did a screwdriver do the trick? 1
@
@apprenticedtopicbookcritic101i4 years agoIt is a beautiful table, and you installed it brilliantly, thank you for sharing. Do you have a tutorial about LINNMON Standing Desk-! It is a table like the modern engineering LINNMON Table chassis Canson drawing but the flat one for studying and business. I can't find a tutorial about the LINNMON on Youtube, not the ones published, I need this one am talking about specifically, my problem I don't know if there are holes for the nails to be screwed, I don't have a problem in conception or fitting pieces together, my problem is I can't create holes, am afraid it would be a mess, so if a tutorial exists, it will help me, so please if you have one Rasslan give debrief me about it. ...1
@
@OliverRandorff4 years agoGreat video! How stable is the desk when in sitting/standing position? 1
@
@WarriorsPhoto4 years agoYo Ruslan. Why did you upload this video as an SD only video? And of course great video dude. I am looking for a standing desk myself. (: Who's the clean shaven dude in this video? 2
@
@WalterVermeir4 years agoI am worried about put screws in that top because it is just carton inside. There is no mention about it so I suppose that is not a problem I suppose. Anyone who has experience how to drill screws inside them to attach stuff? ...2
@
@AnjaliGola4 years agoWhat was the dimension of the frame and the table top? 1
@
@MorpheusLoopYMCMB4 years agoWhy did you get an IKEA table top? Fully also offer a black laminated top, just curious 1
@
@LCaaroe4 years agoI'm really interested in seeing a video demonstrating the stability - I know you've said it only shakes when you type hard, but people type differently, and Jarvis has promised that the new 2020 version (that you seem to have) should have increased stability over the old. The old one looks pretty bad when it comes to stability - looking at this test video: ...
Related videos for Jarvis Standing Desk by Fully and IKEA Table Top (Linnmon) | YouTube Editor Setup | Office Tour:
Who's the clean shaven dude in this video? 2
Who's the clean shaven dude in this video? 2